Control Modules
Displays
Keypads
Product Resources
About
Who We Serve
Stories & Insights
Careers
Contact Us
CL-446

CL-446

High density analog input module with sensor power supply and a mix of direct power outputs.
Inputs
20
Outputs
8
Current
5A PWM output
CAN
3 plus 4 other comm ports

Product Specifications

Hardware

Overview

16-bit HCS12X Microcontroller running at up to 50 MHz

MCU

S12XEQ512

Flash

512 KB

RAM

32 KB

interfaces

CAN

2x J1939 CAN ports

Mechanical

Housing Material

PA66 GF15Nylon 66 / 15% Glass Fibers)

Installation

Panel mount

Connectors

DT06-12SA DT06-12SB DT06-12SC DT06-12SD W12S (wedge) – one per connector required 0462-201-16141 16AWG sockets 114017 Sealing Plugs – Unused pins are required to be sealed to maintain module sealing

Dimensions

6.29″ x 7.912″ x 2.14″

weight

~1.35 lbs

contacts

  • 16-18 AWG: 0462-201-16141
  • 14-16 AWG: 0462-209-16141

Plugs

Non-locking: 114017Locking: 0413-217-1605

Wire Size

14-16 AWG or 16-18 AWG

Mounting & Torque

1/4″ or M6 Fastener62-88 in-lb

Indicators

1x Green Power1x Red Status

Electrical

Operating Voltage

8-32VDC

Key Switch

Yes

Max I/O Available

20/8

Inputs

10x Inputs software configurable as switch to battery, switch to ground or 12-bit analog (0-5.5VDC). 4x Inputs software configurable as switch to battery, switch to ground or 12-bit analog (0-11.0VDC). 4x Inputs software configurable as switch to battery, switch to ground, 12-bit analog (0-5.5VDC) or RTD (1K ohm)2x Inputs software configurable as switch to battery, switch to ground, 12-bit analog (0-5.5VDC), frequency, PWM or Quadrature EncoderFrequency max is 10KHz at 50% duty cycle

Outputs

8x 2A PWM outputs with estimated current feedback or 2.5A digital outputs (software configurable as PWM or Digital)

Product Ratings

IP Class

IP67

EU/CE Compliance

CE Marked

Temperature Range

  • Operating: -40C to +70C
  • Storage: -40C to +85C

Downloads

READY TO DOWNLOAD?

PFS-CL446-A2

CL-446 technical information on Inputs, Outputs, CAN, Operating Voltage and other features.

 

CL-446 Module-STEP

CL-446 module step file

CL446-101-B1 Data Sheet

CL-446 module I/O and features

CL446-100-B1 Data Sheet

CL-446 module I/O and features

Related Products

CL-450

  • Input + Output
A powerful body controller with high I/O and multiple CAN ports allowing a bridge to multiple CAN networks.
Inputs
36
Outputs
33
Current
3 A
CAN
3
See More Details

CL-451

  • Input + Output
Compact and typically used to drive stacked valve drive sections or outputs condensed into a single location.
Inputs
17 (total I/O)
Outputs
16 (available)
Current
3 A
CAN
1
See More Details

CL-4002

  • Input + Output
Primarily an output control module with input options used to drive valve and body outputs. Can be used as primary.
Inputs
10 (total I/O)
Outputs
Digital (8) / Analog (2)
Current
5 A
CAN
2
See More Details

Ready To Get Started?

Connect with our team of experts to discuss your project and discover how HED can provide tailored control solutions for your vehicles.

Contact Us